Christmas couple

Hunkydory Snowy season luxury card collection: Christmas couple

Hunkydory adorable scorable cardstock

White ribbon

A5 white card blanks

For the first card, I cut the snowflake cardstock to cover the card front. I then tied a bow in the ribbon and wrapped this around the cardstock, before I glued it to the card to hide the cut ends and keep it all neat. To create space to allow the image topper to stand out, I die cut an oval from a coordinating plain lilac cardstock to sit inside the frame. I glued the image down onto the die-cut panel using low foam pads. I added the sentiment frame, raised on deeper foam to create dimension and edge the lilac panel. I glued this in position on the card front above the ribbon. I cut the insert down with the coordinating couple image and glued this inside to complete the card.

inside

To create the second card, I used the lilac cardstock which complimented the snowflake paper and frame to soften the design. I pieced together the card front with the lilac panel at the top and a strip of the snowflake cardstock beneath. I covered the join with the border strip from the collection. I then glued the image and frame central to the top panel and added the sentiment topper to the middle of the snowflake panel, all using foam pads. Again, I finished the card with an insert, trimmed down to fit neatly inside.

inside

Mx

It's beginning to look a lot like Christmas

• Hunkydory snowy season luxury card collection: It's beginning to look a lot like Christmas
• Hunkydory little book of snowy scenes
• Hunkydory essential book of Christmas sentiments
• Hunkydory cardstock (offcuts from the other collections)
• Hunkydory adorable scorable cardstock
• silver mirri card
• mama elephant union square creative cuts die
• sizzix scallop square framelits die
• white ribbon & bakers twine
• A5, 7x7", 5x7"  6x6", 5x5" & 6x4" white card blanks

For the 7" square card, I mat and layered the card front with silver mirri card and the cardstock with the border feature. I added the tree topper to the main section of the cardstock and angled the essential book sentiment tag on top. The tag was raised on foam and embellished with a knot of ribbon. I cut the insert down so the inside coordinated with the background card on the front.

inside

I designed this A5 card using the large snow globe topper with some  other cardstock I found, to allow the image to stand out. I chose the adorable scorable cardstock to match the off cut of swirls cardstock, (from another collection) which I though complimented the colours in the topper. I cut the panels of cardstock to fit the card front, edging the swirls border with silver mirri to create a neat join. I positioned the image and sentiment toppers onto the card, using foam pads for dimension.

For this little 6x4" card, I made a feature of the printed image on the cardstock from this collection. I simply trimmed the cardstock to size, so it would fill the card front. I then wrapped the bakers twine around and secured at the back, before gluing down. I tied the twine in a bow and finished with the essential book sentiment placed off centre across the twine. I added the matching insert, cut to fit inside.

inside

I made this 5x7" card with the remaining printed scene cardstock in this collection. I found a little book image where the scene on the page matched the background cardstock. I simply matted the page onto silver mirri card to create a topper. I glued this to the card front, which I had covered with the cardstock. Again, I trimmed the coordinating insert down to fit inside the card, this time featuring the printed sentiment.

inside

I also created this cute little 5" square card using a little book page and the remaining cardstock from this set. I covered the card front with the snowflake cardstock. I die cut a frame from silver mirri card, then cut the little book page to sit neatly inside. I glued these onto the card flat, making a card which is perfect for posting! I finished the inside with the printed sentiment section of the insert, die cut to create a scalloped edge square to compliment the front.

inside

With this final topper, I felt that the colours of the little girls outfit didn't really suit the cardstock in the collection. I therefore made this 6x6" card using some patterned cardstock I had remaining from a previous hunky-dory Christmas set. I mat and layered the cardstock onto silver mirri for the card front. I then positioned the image and sentiment toppers on, using foam pads for dimension.

Mx

A Merry Little Christmas

• Hunkydory festive elegance luxury card collection: A Merry Little Christmas
• Hunkydory second little book of Christmas
• Hunkydory copper mirri cardstock
• A5 & 8x8" card blanks

For the 8" square card, I cut the cardstock down to fill the card front. To ground the sentiment, I added the border strip running across the base of the card. I positioned the sentiment to sit overlapping the border edge. For the main feature, I positioned the topper central with the border surrounds at angles to add interest. I trimmed the insert down to fit inside the card to complete.

inside



 I used the second sheet of cardstock to cover the A5 card blanks. I simply arranged the main topper and little sentiment underneath, sitting on the main panel between the printed borders. For the inside, I cut the insert down to fit neatly.

inside



 For the final card, I created a topper using the matching little book page. I cut the borders off the book image and matted onto coordinating mirri card. I then positioned it centrally onto the card blank, covered with the remaining cardstock. I completed the front with the additional sentiment topper from the collection, placed overlapping the bottom of the main topper. Again, I added the insert into the card for that extra finishing touch.

inside



Mx

'Tis the Season

• Hunkydory snowy season luxury card collection: 'Tis the Season
• White ribbon
• DL, 5x7 & 6x6" white card blanks

For the first DL card, I made a feature of the printed image on the cardstock. I simply trimmed the cardstock to cover the card front and finished with a sentiment tag positioned over the border. I glued the tag down with foam and embellished with a bow tied in ribbon. I cut the insert down to centre the message inside the card.

inside

I created the square card using the remaining cardstock from this sheet. I covered the card front with the subtly patterned cardstock. I then added the coordinating border strip down one side. I positioned the topper image on foam pads and added the tag sentiment overlapping on deeper foam. I added a little bow tied from ribbon to complete. The image section of the insert was trimmed to fit inside to match the focal image on the card front.

inside

I used the three little toppers to make this DL card. I cut the swirl patterned cardstock to fill the card front. I then added ribbon down the centre of the card and secured behind the cardstock before gluing down. I positioned the toppers down the central ribbon, glued with foam pads and finished with a bow at the top. Again, I trimmed the insert down to centralise the printed sentiment inside the card.

inside

For the final card, I created a 5x7" design using the remaining cardstock and toppers from the collection. I used the swirl cardstock as a background and added the coordinating border strip for the front of the card. I then finished the design with the image and sentiment toppers, glued down with foam pads for dimension. I added the offcut of insert, trimmed down to fit inside to complete the card.

inside

Mx

Santa's sleigh ride

• Hunkydory festive elegance luxury card collection: Santa's sleigh ride
• Hunkydory essential book of Christmas sentiments
• Paper smooches Christmas words 2 die
• red cardstock, silver & gold mirri card
• A5, 7x7" & 6x6" card blanks

For the large square card, I mat and layered the cream cardstock onto the card front, to feature the border across the bottom edge. I then positioned the image topper with the sentiment beneath, both on foam pads. I cut down the coordinating insert to fit the inside of the card to finish.

inside

With the A5 card, I covered the card front with the cardstock. I then glued the topper and frame pieces to the top section of the card, all on foam for dimension. I chose a sentiment from the essential book to sit beneath. With the insert, I trimmed this down to centralise the message inside the card.

inside

For the final card, I mat and layered the 6" square card with gold mirri and the printed santa sleigh cardstock. I die cut the 'seasons greetings' from gold and red and glued together offset to create a gold shadow effect. I then positioned the sentiment onto the space beneath the image to finish the card front. Once again, I added the coordinating insert to fit the inside of the card.

inside

Mx

Toyshop Window

• Hunkydory Christmas Classics Luxury Card Collection: Toyshop Window
• Hunkydory second little book of Christmas
• Hunkydory essential book of Christmas sentiments
• A5, 5x7" & 6x6" white card blanks

For the first A5 card, I covered the card front with the cardstock. I then positioned the image topper and frame on foam pads, centred in the top panel. I added the sentiment which coordinated with the frame beneath to complete the front. I cut the insert down to fit inside with the printed sentiment.

inside

Using the other half of the cardstock, I created a 5x7" card. I covered the card front with the cardstock, trimmed down to fit. I then added the image topper to the centre of the top section and positioned an essential book sentiment on the printed border. I cut the remaining insert down, so the inside of the card matched the background of the card front.

inside

I used the matching little book to create a topper for this A5 card. I cut the cardstock to fit the card front. For the topper, I glued the frame to the little book page then trimmed away the excess image from behind the outer edge of the frame. I glued this to the card front with a sentiment from the collection, overlapping at the base. I cut the insert down to fit neatly inside, complete with the printed message.

inside

For the square card, I cut down the remaining cardstock to fit the card front, with the wreaths down one side. I then glued the topper and an essential book sentiment to the main panel of the card front. I added the insert to the inside of the card to finish the collection.

inside

Mx

The Nativity

• Hunkydory Christmas classics: The Nativity
• gold mirri card
• 7x7" & 5x7" card blanks

 

For the 7" square card, I mat and layered the card front with the gold mirri and the patterned cardstock. I centralised the image topper and positioned the border edge pieces above and below. I trimmed the insert down to fit inside the card, with the printed message.

inside

 

Using the other sheet of cardstock from the collection, I created this 5x7" card. I covered the card front with the cardstock. I then arranged the toppers onto the card and glued down with shallow foam pads to create dimension, but allow for easy posting. I cut the coordinating insert down to fit inside.

inside

 
I made a feature of the printed scene on the remaining cardstock for this 5x7" landscape card. I simply mat and layered the cardstock onto gold mirri for the card front and finished with the sentiment topper up in the sky.

 

Mx