Saturday 22 December 2018

for the grandparents




  • LOTV- twice as nice
  • Neenah classic crest cardstock 
  • Copics- C00,0,1,3,4,5,6. E21,50,51,93. RV91. R81,83,85.
  • Lawn fawn- large stitched rectangle stackable 
  • Wink of Stella ‘clear’ glitter brush marker

I was asked to make a grandparents card to say congratulations on the arrival of twins. As I was struggling to find the perfect sentiment, I created a custom one digitally and printed onto cardstock. I then stamped my image above the sentiment and coloured it with copics. I used stitches stackable dies to cut the cardstock and patterned paper into panels. These were simply glued down flat to the card blank. I added a touch of sparkle to the hearts to complete.
Mx

Thursday 20 December 2018

twins !


  

  • LOTV- twice as nice
  • SU!- inspired events
  • Lawn fawn- finley’s ABC dies, dotted circle stackable 
  • Neenah classic crest cardstock 
  • Copics- C00,0,1,3,4,5,6. E21,50,51,93. RV91. R81,83,85.
  • First edition paper- sweet nothings paper pad
  • Pink glitter paper
  • Wink of Stella ‘clear’ glitter brush marker


  • To make this card, I stamped my image and sentiment onto cardstock. I coloured the image with copics and die cut into a panel. I also die cut the letters to spell out 'twins' from glitter paper to complete the sentiment. I cut a mat of patterned paper to fit the card blank, leaving a small white border and glued into position. I then added the panel with the letters beneath and finished with a touch of sparkle on the image.
    Mx

    Tuesday 20 November 2018

    teddy at play




    • Hunkydory for the boys: teddy at play
    • Hunkydory essential book of sentiments 2018
    • coordinating cardstock
    • Gold mirri card
     
    I cut away a section from the open edge of the front my card blank to create a reveal to the inside. I covered the inside with one of the inserts from the set, trimmed to size. I covered the front of the card blank with the cardstock from the collection so the printed bear image became the main feature. Following the sketch, I then cut a band of coordinating cardstock, matted onto mirri to create the border edge. I took a sentiment from the book and positioned this overlapping the band to complete the card.
     
    Mx
     
    I would like to enter the following challenge:

    Monday 12 November 2018

    sweet baby


    • LOTV- sweet baby stamp set
    • Lawn fawn- large rectangle stitched stackables
    • LOTV & nit wit- country meadow paper pad
    • Neenah classic crest cardstock 
    • copics- E21,50,51,93. C00,0,1,2. R85,83,81. RV91. Y15,13,11. YR30
    • Wink of Stella ‘clear’ glitter brush pen
    I printed my custom sentiment made on the computer, onto cardstock leaving space for the image. I stamped the image above the sentiment and die cut into a panel. I coloured with copics and added sparkle to the dots. I then diecut some patterned paper using the larger die which fits neatly onto the card blank. I simply layered these together flat and glued onto the card front to finish.
    Mx

    Friday 9 November 2018

    my birthday cake

    • LOTV- my birthday cake
    • LOTV & nitwit- pastel dreams
    • Tattered lace- essentials circle dies
    • Neenah classic crest cardstock
    • Memento ‘tuxedo black’ ink pad
    • Copics- E21,50,51,93. R85,83,81. RV91. BG23,11,10. Y13. YR30. E31,35,37,43,44,55,57,59. C00,1,3.
    • Wink of Stella ‘clear’ glitter brush marker
    • Ranger glossy accents 
    • Pink cardstock

    • I stamped, coloured and die cut my image into a circle. I layered this onto the next size die-cut circle, in a coordinating coloured cardstock. I printed my sentiment onto cardstock and die-cut it into a circle, then layered it with pink the same as the image. I mat and layered the card blank with coloured cardstock and floral paper. To complete the card, I glued everything onto my card blank, using different depths of foam pads for dimension. The final touch was a bit of sparkle and some glossy accents on the balloon.
     
    Mx

    Tuesday 2 October 2018

    Rainbow thanks


    • Lawn fawn- louie’s ABCs dies
    • SU!- simply wonderful stamp
    • Tim holtz distress ink pads- festive berries, candied apples, carved pumpkin, fossilised amber, mustard seed, mowed lawn, peacock feathers, salty ocean, shaded lilac & dusty concord
    • Watercolour cardstock
    • Black cardstock
    • Black funky foam
    • Archival ink pad- jet black
    • Landscape dl cardblank
    I cut a piece of white card stock to the size of my card and used the ink pads to create a rainbow background. I used a lot of colours to get a smooth blend but you don’t need to. I then lined up the alphabet dies onto the background and cut, keeping all the pieces. I stamped the sentiment underneath. I trimmed the background down and layered onto a matt of black cardstock, then glued to the card blank. To add depth, I die cut the same letters from foam and glued them into the gaps on the background, topped with the saved cardstock pieces. I love how simple but effective this card is.
    Mx
     
    I would like to enter simon Wednesday says 'anything goes' 

    Thursday 30 August 2018

    butterfly greetings


    • Stamping Bella- tiny townie Brianna the butterfly
    • SU!- cottage greetings
    • Copics- E31,34,55,37,93. N5,7,8. R81,83,85. YG03. BG10,11,23,34. 
    • Neenah classic crest cardstock 
    • Tim holtz ‘squeezed lemonade & fossilised amber’ distress ink pads
    • Archival ‘jet black’ ink pad
    • Wink of Stella ‘clear’ glitter brush pen
    • Sequins  
    To make this card I firstly stamped and coloured my image using copics. I added a touch of sparkle to the pink details on her wings (although this doesn’t show on the pictures). I then decided on a layout using the sketch and stamped the ‘thanks’ sentiment in place.
     
    before
    I felt this was a little too much blank space, so I added a ombré of yellow to the card blank to create a background. I then added a few sequins for embellishment. 
    Although the yellow turned out a bit darker than I planned and the card is possibly too fussy. I quite like it and feel it is more appropriate for the recipient.
    Mx
    The challenge I would like to enter is 
    Case this sketch #286

    Monday 13 August 2018

    thankyou stars

    • SU!- so very much
    • Archival ‘jet black’ ink pad
    • Watercolour cardstock 
    • Tim holt distress ink pads/reinkers 
    • Pixie powders
    • Silver star sequin/ embellishments
    To create my main panel, I brushed water on to a piece of water colour card. I squished the ink pad onto a palette and added some water. I used a big brush to pick up the colour and touch it to the wet cardstock. I added a small tap of coordinating pixie powders over the top to add shimmer. I left this to dry, removing excess water if necessary. You could use mica powders and reinkers to do this technique if you preferred. 
      
    Once fully dry, I stamped the large sentiment stamp slightly off centre, then added the smaller phrase to the bottom corner. I cut the panel down to size and matt and layered onto some black cardstock. I glued this onto the front of my card blank.

    The final touch was to add small star embellishments to the card, I think this helps balance the design and completes the sketch. I like how this card uses distress ink to create quite a soft and pretty finish.
     
     
    Mx

    I would like to enter:

    Tuesday 7 August 2018

    thankyou sunshine!

    • Altenew- hello sunshine
    • Avery Elle- tag for all die
    • Lawn fawn- large dotted rectangle stackable 
    • Neenah classic crest cardstock 
    • Copics- R81, 83, 85. RV91. V01, 12, 15. Y08, 15, 17, 18, 38. YG03, 05, 23, 25. G02, 12. 0.
    • Memento ‘tuxedo black’ ink pad
    • Brilliance ‘star lite silver’ ink pad
    • Silver Miri & black cardstock
    • Metallic silver thread

    I used the floral image stamps to create my background. I die cut this using a largest rectangle die. I coloured my images with copics. I also used a silver ink pad and the tiny image to fill in some of the spaces between the flowers. 
    I looped the silver thread and placed it in the corner of my card panel. I die cut the ‘thankyou’ first from black cardstock and glued it in place, (this also holds the thread in place). I then die cut the words from silver Miri cardstock and glued this on top, slightly off set to create a shadow. 
    Since I am posting this card I wanted to keep it quite flat,but felt it benefited from the slight dimension of the words and thread.
    Mx

    Challenge I would like to enter:

    Wednesday 25 July 2018

    Donut treats


    • Mama elephant: donut treats stamps & dies
    • Stampin up!: hello you thinlits dies
    • Craftwork cards: guilty pleasures paper pad(sprinkles)
    • DCWV: fresh florals (dots, i think only had a scrap left)
    • Neenah classic crest cardstock
    • Memento ‘tuxedo black’ ink pad
    • Copics: mice-W00,W1,R01. donuts-E41,E31,E55. frosting & hats- Y08,Y11,Y15. V01,V12. R81,R83,R85. BG34,BG23. box- BG10,BG11.
    • zig wink of stella 'clear' sparkle brush pen
    I covered the front of my card blank in the pink dotty paper. I cut a mat of sprinkle cardstock as a layer. I diecut the ‘thanks’ from the centre top. I glued this onto the card.
    I stamped coloured and diecut the mice and donut images. I played about til i had an arrangement i was happy with. Then glued all the pieces down using both glue and foam to add dimension. 
    The final touch was to add sparkle to all of the donut frosting.

     
    To decorate the inside of the card, i added a coordinating sentiment from the stamp set in the centre. I also stamped, coloured and die cut a small image, and glued this to the bottom corner of the card.
     
     
    Mx

    I would like to enter the following challenges (linked below):
     





    Wednesday 27 June 2018

    sew lovely

     
    • lawn fawn: sew lovely stamp set, zig zag rectangle stackables
    • SU!: bloomin' marvellous stamp set, soft suede & early espresso ink pads and oval, scallop oval & banner punches
    • at you spica glitter pens
    • white card and small paper scraps
    
     I die cut two pieces of card using the zig zag stackables for interest. On the first piece I stamped spools of thread all over to create a background. I used glitter pens to add colour and detail. On the second piece I stamped a button in the bottom corner and highlighted with the coloured glitter, leaving space to write.
    I stamped my sentiment and cut it out using the oval punch. I used a scallop oval punch and a piece of coloured card to make a mat. I found coordinating patterned papers and punched into banners. I layered all of these together and positioned onto my spool background. To complete my note cards/ postcards, I glued the panels together back to back.
    I think these are simple but a cute alternative to a card, although it would easily be recreated as a card front and insert. These are sewing themed (see more below) but you could use this idea for all themes by changing the stamps used.
    Mx 
    the back with button detail and space to write the message


    Monday 28 May 2018

    writing notes


    • Stampin up!- writing notes & colour me happy stamp sets
    • Lawn fawn 'blue jay'& 'lobster' ink pads
    • Memento ‘tuxedo black’ ink pad
    • Copics- R32. RV42. BG13,32. BG0000.01.02. B00. Y02,15,18. E23. C0.
    • Sakura glaze pen #849
    • Wink of Stella ‘clear’ glitter brush pen
    I first cut a piece of card to cover the front of my card blank. I stamped this with the writing notes background stamp, using two colours to give the full note paper look. To do this, I carefully just inked up the lines I wanted red, stamped then cleaned my stamp and repeated with the blue. I used the Misti to help make sure it all lined up. If you didn’t have a Misti, it would be easier to just carefully apply both colours of ink to your stamp then stamp all at once.
    I then stamped my bird image and sentiment in position on the card and coloured these using copics. I added glitter to the ‘thank’ and glaze pen to the ‘you’ and the birds eye. I think this just adds a bit of detail to a simple card.
    Mx

    I would like to enter the following challenges:
    Simon ‘Monday’ Says... inspired by a song (bluebird by Sara bareillies)

    Tuesday 15 May 2018

    Sweet pea


    • Stamping Bella- sweet pea garden girl
    • SU!- made for you
    • Lawn fawn- grassy border
    • Memento ‘tuxedo black’ ink pad
    • Neenah classic crest cardstock 
    • Copics- E50,51,21,93.55,57,59. YG25,33,21. BV000,00. V22. W00,1.
    • Tim holtz ‘broken China & ‘ distress ink pad
    • White card blank
    I stamped, coloured and die cut my garden girl image. I diecut the grass to create a mask. I used the first half to mask the sky and inked the green. Then used the other half to mask the green and ink the sky. I did this very basic just to add some colour, but you could make additional masks to create more dimension (maybe add clouds for example). I stamped my sentiment in the corner of the inked background and added my image using foam pads to match the sketch.
    Mx

    I would like to enter:

    Sunday 13 May 2018

    new baby


    • SU!- two by two
    • SU!- festive impressions embossing folder
    • Lawn fawn- large dotted square stackables 
    • Kraft & white cardstock
    • Neenah classic creast cardstock
    • Memento ‘tuxedo black’ ink pad
    • Copics- E31,35,37,41,55. B000,00,02,04. BG02. V04,12. R000,14,24. YR15,31. Y15,18,32,38. N2,4.
    • Tim holtz ‘fossilised Amber & wild honey’ distress oxide ink pad
    To make this card I firstly created my background. I cut a piece of white cardstock and used distress oxide ink to make an ombré effect. I used a embossing folder to add texture and pattern. I glued this onto a kraft card blank.
    I Used a piece of Neenah card to stamp and colour my image. I then die cut this, I also die cut a piece of kraft cardstock and layered this at an angle to match the sketch. I glued both pieces onto the card blank to finish. 
    Mx

    I would like to enter:

    Sunday 22 April 2018

    Birthday bus



    • Avery Elle- birthday bus
    • My favourite things- big birthday die
    • Lawn fawn- large dotted rectangle stackable
    • Memento ‘tuxedo black’ ink pad & dual marker
    • Neenah classic crest
    • Copic- C00,C1,C3,C4,C6,C8. W00,W1,W3,W5. E53, E55,E57,E70,E71,E74,E77,E93. RV42,R43,R32. Y32,YR21. BG70.
    • Watercolour cardstock
    • Tim holtz ‘squeezed lemonade, worn lipstick’ distress ink pads
    • Cosmic shimmer ;burnt orange, straw yellow, scarlet mist’ pixie powders
    • Wink of stella ’clear’ glitter brush marker
    • White embroidery floss
    I made my background using inkpads, pixie powders and water. Once dried, I die cut into a panel with the largest rectangle. I then die cut the birthday into the panel, making sure to keep all the cut pieces. I glued the panel and the inside letter pieces onto my white card blank. On another sheet of cardstock, I stamped my images and coloured using copics. I fussy cut all the pieces and glued the little white smoke puffs flat. I added foam tape to the bus for dimension. To attach the balloons, I first tied 2 strands of embroidery floss onto the balloon with a little knot. I then added foam tape to stick it in position and used a few dots of glue to keep the string in place where I wanted. The final touch was a bit of glitter to the hats and balloons.

    Thursday 19 April 2018

    Fairy birthday


    • My favourite things- big birthday die
    • Lawn fawn- large dotted rectangle stackable
    • LOTV- fairy a5 stamp set 
    • Memento ‘tuxedo black’ ink pad & dual marker
    • Neenah classic crest 
    • Copic- C1. E50,51,93. RV42,R43,R32. Y32,YR21. BG70.
    • Watercolour cardstock
    • Tim holtz ‘squeezed lemonade, worn lipstick’ distress ink pads
    • Cosmic shimmer ;burnt orange, straw yellow, scarlet mist’ pixie powders
    • Wink of stella’clear’ glitter brush marker
    • Cosmic shimmer ‘crystal stars’ glitter jewels
     
    I made a water colour background and die cut the happy birthday letters from it. I die cut a panel of white cardstock and positioned the letters, then glued them down flat. I stamped my fairy image to fit in the top corner on to the panel. I coloured the image and added sparkle to the wings. I glued the finished panel to a card blank. The final touch was to glue on some crystal stars for a bit of extra sparkle.

    Mx
    I would like to enter:


    Sunday 15 April 2018

    Manly moments


    • Hunkydory- little book of manly moments
    • Lil’ inker designs- happy birthday border die
    • Paper mania ('son' stamp: not sure what the set was called)
    • Black & white cardstock
    I made a 5x7” card blank and stamped son in the bottom corner. I trimmed the little book image to fit the remaining space and matted onto black cardstock. I then die cut the happy birthday border and placed over the top of the image to match the sketch. 
    I think this simple card is great for men and could easily be adapted with a different image to suit the man!
    Mx

    I would like to enter the challenge:

    Wednesday 4 April 2018

    Sympathy bouquets


    • W plus 9- beautiful bouquets ranunculus
    • Avery elle- with sympathy die
    • Hand written background stamp (not sure which brand)
    • Archival'jet black & sepia' ink pad
    • Watercolour cardstock
    • Zig clean Colorado real brush markers (052,022,260,080,037,033,041,045,046,047)
    • Kraft cardstock
    I stamped the hand written stamp on to the cardblank. I cut a panel of watercolour cardstock to fit the card, leaving a border along the folded edge to reveal the stamped cardblank. I stamped the floral image at the side, slightly over the edge. I coloured this with watercolour markers and water. I glued this panel onto my card blank. I die cut the sentiment from Kraft cardstock and glued in position to complete the sketch.
    Mx


    I would like to enter:


    Monday 2 April 2018

    Bold butterfly sympathy


    • Avery elle-with sympathy die
    • SU!- bold butterfly framelit die
    • Lilac floral paper and coordinating purple paper (from scrap draw, not sure what brand) 
    • Grey (looks darker on photos) and white cardstock
    I cut a strip of floral paper and matted it onto a coordinating plain paper. Following the sketch, I glued this panel in position on a 6x6" square card blank.
    I die cut the sentiment and a butterfly from grey cardstock and glued in position to complete the card. This is a simple sketch, perfect for a sympathy card. 
    Mx

    Challenges I would like to enter:

    Monday 26 March 2018

    Butterfly kisses


    • Mama elephant- butterfly kisses
    • Lawn fawn- thank you borders
    • Watercolour cardstock
    • Archival 'jet black'ink pad
    • Zig clean Colorado real brush markers (052,023,021,045,041,068)
    • Tim holtz 'worn lipstick & tumbled glass' distress ink pad
    • Wink of Stella 'clear' glitter brush marker
    • 4x6" card blank
    I stamped and watercoloured my floral and butterfly images. I cut these out using the coordinating dies. 
    I die cut the sentiment twice from black and a third time using cardstock that I coloured using the pink ink pad. (You could also use the watercolor marker instead). I glued these on top of each other to add dimension. 
    I used the sketch as inspiration to add a bit of blue ink to the card blank, creating a soft circle. I glued all the elements on to the card blank following the sketch. I used foam on the outer edges of the butterfly wings and glued flat in the centre to add extra dimension. To finish the card I addded a bit of sparkle detail to the wings, sentiment and flower centers.
     

    Friday 23 March 2018

    Adrenaline rush part 2


    • Kanban 'adrenaline rush' paper craft toppers
    • DCWV Fresh floral stack 
    • Black & white spot paper (old one from the scrap box)
    • Silver mirri card
    • 7x7" card blank
    I created a layout using two of the toppers with a frame from the collection. I then found two different dotty papers to coordinate. I mat and layered the orange spot onto silver mirri card to leave a white border on the card front. I then trimmed the black spot to fit as a band going down the card. With the toppers, I arranged them onto the card front and glued down with varied depths of foam pads to add more dimension to the card. I completed the front with the sentiment in the top corner, overlapping the circle frame to link it into the design. I think this is a nice bold design perfect for a birthday boy!!

    Mx

    Monday 19 March 2018

    adrenaline rush


    • Kanban 'adrenaline rush' paper craft toppers
    • Stamping up! Teeny tiny sentiments stamp set
    • Paper mania 'happy days' paper stack (& coordinating colours from my scrap box)
    • Silver mirri card
    • 5x7" card blank
    I chose coordinating papers and cut them, following the sketch layout, to fit the card front. I stamped the sentiment onto the red band, before gluing the layers down. I added the topper in position using foam pads for dimension to complete this simple men's card. 

    Mx

    I'd like to enter the following challenge:

    Monday 12 March 2018

    baby christening


    for the card:
    • LOTV- baby christening
    • LOTV- for her sentiments
    • LOTV- vintage labels occasions
    • tattered lace- circle dies
    • LOTV- country lady paper pad
    • memento 'tuxedo black' ink pad
    • Neenah classic crest cardstock
    • copics- skin:E50,51,21,93. window:E31,43,55,57,59.BG70. dress:Wo,1,2,3. pink:R81,83,95,56.RV91. green:YG93
    • kraft cardstock
    • vintage lace ribbon
    • paper roses 
        
     I cut my background papers to size and glued the top section directly to the card blank. I added ribbon to the top edge of the second piece, securing the ribbon ends on the reverse, then glued this onto the front of my card blank. I stamped and coloured my main image on Neenah cardstock, then die cut into a circle. I diecut a larger circle from kraft to mat and layer. I created a custom sentiment by combining several stamps and masking off certain sections to create the saying I wanted. I die cut this into a smaller circle and again matted with a larger kraft layer. Once all of the elements were prepared, I decided on my floral arrangement. As I was using paper roses on wires, I put small holes into the toppers where I would need them and pushed the wire through. I added a small amount of glue directly beneath each rose, then for extra security, I taped the wire in place at the back of the topper.(If you were using flowers without wires or prefer to cut the wires off, you would attach the topper to the card then simply glue the flowers on using hot glue or silicon glue gel.) Finally, I added the completed toppers to my card using foam for dimension.
    


    for the box:
    • a3 kraft cardstock
    • lawn fawn- Finley's ABCs
    • LOTV- country lady paper pad
    As the flowers are raised from the card, I made a simple box with lift off lid to fit my card perfectly, instead of an envelope. I then decorated the lid with die cut letters to spell out the name, using the left over paper from the card. I think this adds an extra personal touch and a professional finish.
    
    Mx
    I'd like to enter the following challenges:

    Sunday 11 March 2018

    it's a girl

    • LOTV- push chair
    • Lawn fawn- it's a girl border
    • forever friends- kraft notes paper pad
    • Neenah classic crest cardstock
    • memento 'tuxedo black' ink pad
    • copics- E50,51,21,93. E43,55. Rv91,93,95. R83. V91,93. C00,1,3,6,7,8,9. W00,2.
    • wink of stella 'clear' glitter brush marker
    To make this card I cut a strip of checked paper and used the word die to cut the top edge. I die cut the words from a coordinating lilac paper. I then cut some copic friendly card stock to size and die cut the bottom edge, I also kept the word strip too. I stamped and coloured the image using copics.
    To make up the card, I glued the piece of check paper to the bottom portion of the card front. I added the white wording and then the image portion to the top of the card front. I glued the lilac word strip on top of the white one and added glitter pen over the words for a touch of sparkle.
    Mx

    I'd like to enter the following challenge:

    Friday 9 February 2018

    Jasmine loves music


    • LOTV- jasmine music & for her sentiments (set20)
    • Tattered lace- circle dies
    • Lawn fawn- Finley's 123s 
    • Memento 'tuxedo black' ink pad
    • Neenahclassic crest cardstock
    • Copics- skin:E50,51,21. R00. Hair:E43,44,47,49. Pink:R81,83,85. Blue:BG15,23,34. Orange:Y38. YR15. Ground:W00,2.
    • Burgundy cardstock
    • 6x8" white card blank
     
    I mat and layered my patterned paper, following the sketch layout. I stamped 'niece' onto the smaller banner, then glued all layers on to my card blank. I stamped and coloured my image and diecut into a circle. I die cut the numbers, once from dot paper and once from card, to layer them to create a shadow. I added this to my card to finish.
     
    Mx
    I would like to enter: