Thursday, 16 October 2014

shake your booties !!

 
I didn't have a plan for this card so I am happy with how it turned out. I haven't done a shaker card in ages and now I know why... they are a bit messy and so hard to photograph!!
 
for this card I took a kraft card blank, (this is a 5x7 landscape.) I cut a mat out of a piece of kraft card and layered it with a piece of paper, from the lili of the valley country lady 8x8 paper pad. I added a piece of ribbon and tied it in a bow, over to one side, and glued the mat onto the card. I used a paper-piercing template and mat from stampin' up! to add some detail to the edges and a pattern across the bottom. next, I stamped a sentiment from the stampin' up! bring on the cake stamp set, using an archival coffee ink pad onto some co-ordinating paper. I then cut this out using a sizzix circle die. I took a third piece of paper from the pad and cut out a circle, using the size down in my circle set. I then glued acetate to the back of the paper before cutting out a bigger scallop circle (with the circle in the middle) to create a frame. to make the shaker I added foam tape all the way around the edge on the back of the acetate, being extra careful not to leave any gaps.  I put the pattern side down and added a bit of glitter a few sequins and a good amount of pinflair ice diamond to the centre. I stuck the stamped circle onto this, remembering to keep the patterned side down. I then turned it over and glued the shaker element onto my card. I finally stamped a magnolia image (tilda with rubber boots) on to craftwork cards digi cardstock, using memento ink and coloured her with promarkers. I cut her out to add to the side of my shaker, using tape on the overlap and foam on the rest to keep her level with the shaker.
 
Mx
 

Sunday, 12 October 2014

autumn blooms

 
 
to make this card I stamped the image (blossom from lili of the valley), on to craftwork cards digi cardstock, using memento in rich cocoa . I coloured this with my promarkers. I used colours to compliment an autumn colour palette, which matched some patterned paper from the all spice 6x6 pad, (my minds eye) that I had chosen. I cut my image into a rectangle and cut the patterned paper to the same size, then layered both of these on to kraft cardstock. I glued some ribbon across the card using small bits of wet glue to hold it down to the card and then added double sided tape in the centre where I knew it would be covered. I glued both toppers down at an angle. I used a scallop oval punch from stampin' up!, to cut a piece of the patterned paper. I  then stamped my sentiment, (for my family set from stampin' up!) on to a piece of scrap white card, then cut it out with the oval punch from stampin' up!. to add a bit more detail to the card, I used a brown fine liner to do small dots in trio's across the background of the card. I also added some stitching to the edge. to finish the card, I used a sakura glitter pen to highlight the image and sentiment.
 
http://ideastoinspire.blogspot.co.uk/p/challenge.html
'anything goes !!'
http://promarkerchallenge.blogspot.co.uk/
 'use your favourite colour combo'
http://ilovepromarkers.blogspot.co.uk/
'autumn colours'
 
Mx

Friday, 26 September 2014

banners for boys!!

 
for this card I have simply mat and layered some blue and white cardstock, then cut banners of patterned cardstock and complimentary coloured cardstocks (all of these were just out of my scrap box). I stamped a sentiment from the says it all set from stampin' up! using a jet black archival ink pad. I cut this into a banner and mat and layered on to the blue. I glued all the layers into position to finish the card. this is a very simple card that is great for everyone... just pick your papers to suit the person!!
 

 
Mx

Wednesday, 24 September 2014

tag it! & my new craft room...

 
I used mainly tim holtz products to make this tag, distress ink pads  (shabby shutter, scattered straw, dusty concord  dried marigold, gathered twigs & black soot) , distressing tool, shatter stencil, nostalgic kraft -core collection cardstock(core-dinations) and the Halloween shadows alteration sizzlit die (sizzix). I also use ranger manila tag, glossy accents and dreamweaver embossing paste in translucent.
 
to make this tag I inked my background using distress ink pads, I then distressed the edges and added more colour to them. i used embossing paste through the shatter stencil in the top corner. I  then die cut my embellishments. once the tag had dried I glued the shapes on to the tag where I wanted them. i cut the trick or treat icon twice using different colours and fussy cut the layers to add interest. I added extra detail at the bottom by using some glossy accents to the shape, I wanted this to stand out and be more of a focal point. it just needs some ribbon adding to the top then it will be finished.
 
 

 
this is a picture of my new craft room... I might add a shelf for my books, few pictures and decorations, but otherwise its done. I am so happy with the way it turned out. I have plenty of storage and finally know where everything is, which makes crafting so much easier. * the really cool knobs are from a little shop in scarborough called homebird house*
 
Mx

Wednesday, 10 September 2014

off the page crafting !!

since I haven't been blogging much whilst we have had builders in at home, I thought I would share what I have been doing. I haven't been able to craft much, so I kept busy with some upcycling and home décor projects ...


 I bought this chest of drawers and a matching dressing table (I forgot the take a 'before' picture of that). although it was painted a lovely grey colour, it didn't match the colour scheme for my bedroom. I decided to paint it using autentico chalk paint in rose, finished using their clear wax sealer. the paint went on easy and the furniture needed very little prep, just be aware that it does dry very quickly!! this is how they turned out...



i had been wanting my granddad's old bedside cabinet, so I asked my nana if I could have it... it took a little persuading but she gave me it with pleasure in the end. I sanded it down as there were a few little chips (which I fillered) and it had a polished surface.  I then painted it to match and added a matching knob. I also lined the shelf and cupboard using some pretty wallpaper. I think it looks great now and means so much more because it was my granddad's...

after sanding


after painting
I had bought some vintage lace cheap from an antiques fair, that my dad took us too. I used it as a simple way to add detail to a pair of old bedside lamps. I marked in pencil where I wanted my trim to be and used fabric glue to stick the lace on to them ...


before


after

 I also did the same to a cream lamp shade (from argos).


I'm pretty pleased with how my upcycling has turned out, adding some crafty touches to my new room. I must say a big thank you to my dad for helping me with my projects. I hope you have been inspired to have fun customizing some pieces too!!

Mx

Saturday, 30 August 2014

dotty about mushrooms!!

 
 
because it is the last ever challenge from the seize the sketch blog I knew I had to make a card. It is my friends birthday coming up and as she loves mushrooms, I knew the stamp out of the everybunny set would be perfect. because the image is a small stamp this sketch showed it off perfectly...
 
for my card i used a 5x5 red card blank, craftwork cards digi cardstock, archival ink in carnation red and tuxedo black memento. the stamp sets were all from stampin' up!, every bunny, petite pairs and distress dots. I also used sizzix circle framelit dies, promarkers and a bit of white ribbon
 
I cut a piece of card slightly smaller than my card blank to create my mat and stamped it with the background dots in red. I used a circle die to form my apertures. the ribbon was added at the bottom of the mat and the end was taped on the reverse to make a neat finish, this was then glued on to the card blank using foam pads.  I used an off cut of the digi cardstock to stamp my mushroom image and cut this out using a smaller circle die from the set, I then coloured the image using promarkers. I stamped the sentiment on to another piece of card and die cut it in the same way. I used double sided tape to glue these in to the middle of the apertures. I made a matching insert with the main image in the bottom corner, to give the card a professional finish. 
 
 
 
Mx

Friday, 29 August 2014

say it with flowers...

 
this is the first card I have made in my new craft room. the craft room is by no means finished and tidy but usable all the same (I will take pictures once I have finished decorating and have unpacked fully)
 
I have used a 6x4 white card blank, coffee archival ink pad, express yourself stamp set from stampin' up! the paper flowers and buttons were from my stash and the patterned papers were bits out of my scrap drawer...
I cut the patterned paper to the right sized mats and cut the smaller piece into a banner shape. I then inked the edges, glued the mats down and stamped my sentiment underneath, following the sketch. I choose some paper flowers and buttons in colours to match the patterned papers. I arranged them and when I was happy, I glued them all on to the card.
 

Mx