Showing posts with label congratulations. Show all posts
Showing posts with label congratulations. Show all posts

Saturday, 22 December 2018

for the grandparents




  • LOTV- twice as nice
  • Neenah classic crest cardstock 
  • Copics- C00,0,1,3,4,5,6. E21,50,51,93. RV91. R81,83,85.
  • Lawn fawn- large stitched rectangle stackable 
  • Wink of Stella ‘clear’ glitter brush marker

I was asked to make a grandparents card to say congratulations on the arrival of twins. As I was struggling to find the perfect sentiment, I created a custom one digitally and printed onto cardstock. I then stamped my image above the sentiment and coloured it with copics. I used stitches stackable dies to cut the cardstock and patterned paper into panels. These were simply glued down flat to the card blank. I added a touch of sparkle to the hearts to complete.
Mx

Monday, 12 March 2018

baby christening


for the card:
  • LOTV- baby christening
  • LOTV- for her sentiments
  • LOTV- vintage labels occasions
  • tattered lace- circle dies
  • LOTV- country lady paper pad
  • memento 'tuxedo black' ink pad
  • Neenah classic crest cardstock
  • copics- skin:E50,51,21,93. window:E31,43,55,57,59.BG70. dress:Wo,1,2,3. pink:R81,83,95,56.RV91. green:YG93
  • kraft cardstock
  • vintage lace ribbon
  • paper roses 
      
 I cut my background papers to size and glued the top section directly to the card blank. I added ribbon to the top edge of the second piece, securing the ribbon ends on the reverse, then glued this onto the front of my card blank. I stamped and coloured my main image on Neenah cardstock, then die cut into a circle. I diecut a larger circle from kraft to mat and layer. I created a custom sentiment by combining several stamps and masking off certain sections to create the saying I wanted. I die cut this into a smaller circle and again matted with a larger kraft layer. Once all of the elements were prepared, I decided on my floral arrangement. As I was using paper roses on wires, I put small holes into the toppers where I would need them and pushed the wire through. I added a small amount of glue directly beneath each rose, then for extra security, I taped the wire in place at the back of the topper.(If you were using flowers without wires or prefer to cut the wires off, you would attach the topper to the card then simply glue the flowers on using hot glue or silicon glue gel.) Finally, I added the completed toppers to my card using foam for dimension.



for the box:
  • a3 kraft cardstock
  • lawn fawn- Finley's ABCs
  • LOTV- country lady paper pad
As the flowers are raised from the card, I made a simple box with lift off lid to fit my card perfectly, instead of an envelope. I then decorated the lid with die cut letters to spell out the name, using the left over paper from the card. I think this adds an extra personal touch and a professional finish.

Mx
I'd like to enter the following challenges:

Tuesday, 2 January 2018

Bambi for baby...


  • Disney Bambi metal die
  • My favourite things- stitched rectangle scallop edge frame
  • Lawn fawn-Finley's ABCs
  • Forever friends (docrafts) Kraft notes 12" paper pad
  • Neenahclassic crest cardstock
  • Copics- E30,31,34,35,37,39,57,59. W8,10. R83,81,000.
  • Grey 8" square frame
First I cut check paper to fill the background of the frame.
I then die cut letters from coordinating lilac paper, to spell out the baby's name. To position the letters, I started in the centre and worked outwards to space them evenly before gluing down. To create a frame for the photo, I found the right size scallop frame die and cut from lilac paper. This was then glued in place beneath the name. For a cute focal point, I die cut the Bambi image from white card stock, with tape on the back to stop all the pieces falling out. I coloured him using copics before I glued into position, slightly overlapping the diecut frame. Using a craft knife, I cut around the inside of the frame to remove the check paper and create an aperture for a photo. I cut a piece of white cardstock to fit the frame. I layered this behind my decorated piece as a plain backing for the aperture to make it look nicer to gift. 
Once the new parents receive their frame, they can simply open the back and pop their chosen picture of their new baby girl into place. Of course you could change the colour scheme as a gift for a baby boy too!! 

Mx

Sunday, 10 September 2017

babies companion


  • LOTV- babies companion stamps
  • LOTV & nitwit- always & forever paper pad
  • Lawn fawn- small stitched circle stackables
  • Paper smooches- 'congratulations' word die
  • Neenah classic crest cardstock
  • Memento 'tuxedo black'ink pad
  • Copics- E30,31,34,35,37. R0000. R81,83,85. YG61. E40,41. C00,0,2. 0.
  • Wink of stella 'clear' glitter
  • 6"x6" white cardblank
I followed the sketch layout to create this pretty card for a baby girl. I chose the paper and trimmed it down to create the border. I cut strips of silver paper to edge this top and bottom, before gluing flat to the card front. I stamped, coloured and die cut the image to coordinate. For the sentiment, I die cut the word, coloured it with copics and added glitter pen to make it sparkle. I glued the topper and sentiment into position to complete the card.
I would like to enter the following challenges:
Simon Monday says 'stamp it'

Mx

Friday, 1 September 2017

just married

  •  hunkydory special occasions luxury card collection: just married
  • silver mirri card
  • A5, 6x6" & 7x7" card blanks
 
For the first card, I took the plainer half of one cardstock sheet and matted this onto the A5 card blank. I then positioned the topper image and frame on the front, with the 'just married' letter hearts arranged below and glued down with foam pads.
 

I created a 6" square card using the image on the remaining cardstock as a focal point. I simply trimmed and layered onto silver mirri to fit the card front. I added the sentiment topper on foam to complete.
 
 
For the 7x7" card, I used the remaining toppers and cardstock to create a softer look. Again, I trimmed the matt of cardstock down, layered onto mirri and glued to the card front. I added the centre image topper and frame, finished with the sentiment in the top corner.  
 
 
 

Mx

Saturday, 18 March 2017

Congratulations toast...



  • SU!- making spirits bright
  • Mama elephant- 'union square' framed tag creative cuts
  • Paper smooches-congratulations die
  • Memento 'tuxedo black' ink pad
  • Copics- E40,81. BG70. C00.
  • Wink of stella 'clear' glitter brush pen
  • Ranger glossy accents
  • White card
  • Cream glitter card
  • Bronze sequins
I cut a matt of glitter card to fit my card blank. I then cut a matt of white card to sit on top and stamped my image in the centre. I coloured this with copics, then added a clear glitter to make the bubbles glisten, followed by a layer of glossy accents to add shine to the glasses. Whilst this dried, I created the shaker element. I die cut the aperture from the centre of a matt of white cardstock. I then added a piece of acetate to the back of this panel and edged this with foam tape (making sure there will be a full seal with no gaps for sequins to escape!) I made sure the glossy accents were dry, before adding a neat pile of sequins on top. I then positioned the shaker frame onto the card, trapping the sequins in place. To complete the card, I die cut a sentiment from the glitter card and added this across the front of the shaker.
Mx

Thursday, 2 March 2017

Brynn has a baby shower

  • Stamping bella- Brynn has a baby shower
  • Neenahclassic crest cardstock
  • Memento'tuxedo black'ink pad
  • Copics- E50,51,21,93. E34,35,37,57,59. BV0000,000,01,02,04. Y18,15,11. R24. BG70. W00,1,3.
  • Yellow embossed dot & lilac cardstock
To create this card, I covered the card blank with the dotty card. I then cut a matt of white for the stamped image and a layer of lilac card stock. I stamped and coloured the image before adding to the card following the sketch. I added a coordinating banner stamped with a sentiment to complete the card.
 
Mx
 
I would like to enter the following challenge:

Sunday, 27 November 2016

coral congratulations ...

  • paper smooches wise dies 'congratulations'
  • stampin up! 'love & laughter' stamp set
  • kraft 5x5 card blank
  • white cardstock
  • funky foam
  • memento tuxedo black ink
  • tim holtz distress ink 'abandoned coral'
I took a piece of white cardstock and created an ombre effect with the coral distress inks. I then backed the card with funky foam before die cutting the sentiment out 3 times. On the card blank, I stamped the cake and engagement sentiments using the black ink. I then glued the congratulations on top to complete the sketch.
 
Mx

I would like to enter the following challenges:
cas(e) this sketch #199
simon monday says 'trio-tastic'

Tuesday, 18 October 2016

Sweet rocking horse...

  • LOTV- rocking horse
  • SU!- sweet essentials
  • Memento 'tuxedo black' ink pad 
  • Neenah classic crest cardstock 
  • Copics- skin:E50,51,21,11,93. Teddy:E53,55,57. Rocking horse:W0,1,3,5,6,7. Pink:R81,83,85. Ground:C00,1,3.
  • Lawn fawn- large dotted rectangle stackables 
  • Tim holtz distress ink pad - spun sugar & picked raspberry 
  • Tattered lace- embossing folder (not sure on the design name)
I die cut a piece of cardstock to create my base layer. I inked this using 2 shades of pink, to create an ombre effect background. I then used a embossing folder and my big shot machine to create texture, then I glued this to my card blank. I die cut another matt of cardstock and stamped my image and sentiment. I coloured the image using copics and glued it to the centre of my card.
Mx
 

Sweet rocking horse...

  • LOTV- rocking horse
  • SU!- sweet essentials
  • Memento 'tuxedo black' ink pad 
  • Neenah classic crest cardstock 
  • Copics- skin:E50,51,21,11,93. Teddy:E53,55,57. Rocking horse:W0,1,3,5,6,7. Pink:R81,83,85. Ground:C00,1,3.
  • Lawn fawn- large dotted rectangle stackables 
  • Tim holtz distress ink pad - spun sugar & picked raspberry 
  • Tattered lace- embossing folder (not sure on the design name)
I die cut a piece of cardstock to create my base layer. I inked this using 2 shades of pink, to create an ombre effect background. I then used a embossing folder and my big shot machine to create texture, then I glued this to my card blank. I die cut another matt of cardstock and stamped my image and sentiment. I coloured the image using copics and glued it to the centre of my card.
Mx

I would like to enter the following challenge:

Sweet rocking horse...

  • LOTV- rocking horse
  • SU!- sweet essentials
  • Memento 'tuxedo black' ink pad 
  • Neenah classic crest cardstock 
  • Copics- skin:E50,51,21,11,93. Teddy:E53,55,57. Rocking horse:W0,1,3,5,6,7. Pink:R81,83,85. Ground:C00,1,3.
  • Lawn fawn- large dotted rectangle stackables 
  • Tim holtz distress ink pad - spun sugar & picked raspberry 
  • Tattered lace- embossing folder (not sure on the design name)
I die cut a piece of cardstock to create my base layer. I inked this using 2 shades of pink, to create an ombre effect background. I then used a embossing folder and my big shot machine to create texture, then I glued this to my card blank. I die cut another matt of cardstock and stamped my image and sentiment. I coloured the image using copics and glued it to the centre of my card.
Mx

Friday, 9 September 2016

Special delivery!!


  • LOTV- special delivery 
  • LOTV- bear necessities paper pad
  • Paper smooches- congratulations die
  • Tattered lace- circles dies
  • Memento 'tuxedo black' ink pad
  • Neenahclassic crest cardstock 
  • Copics- R12,30. W00,0,1,2,3,4,5. E55,57,59. E40,41.
 
I cut a matt of pink paper to fit my card black. I cut a matt of Kraft card and layered with some heart patterned paper. I stamped and coloured my image. I die cut this into a circle and glued on top of a slightly larger Kraft circle. I added this onto my card using foam tape for dimension. I die cut congratulations twice from Kraft cardstock. I glued both together then onto the card to finish.
Mx

Challenge i would like to enter:
And the like of the valley 'animals' challenge on their Facebook page

Thursday, 4 August 2016

two by two!!


  • Daler Rowney- Aqua fine watercolour cardstock 
  • SU!-two by two
  • Archival 'jet black' ink pad
  • SU! Ink pads- daffodil delight, pumpkin pie, Bermuda bay, watermelon wonder, melon mambo, tip top taupe, pacific point
  • Brown watercolour pencils
  • Kraft 4x6" card blank

I cut a matt of card stock and stamped my image in the top portion of the panel. I used watercolour pencils and ink pads to water color my image and add a ombre effect background. I glued the panel on to my card blank to finish. You could add more embellishment, but I think this is a super quick baby card, perfect for a boy or girl.
Mx

Challenge i would like to enter:

Wednesday, 27 January 2016

both for baby...

main supplies:
  • SU! big news 
  • craftwork cards Amelia & Jacob papers
  • lawn fawn- stitched square stackables dies
  • mama elephant- stitched landscapes dies
  • 5x5"card blank & white cardstock
  • memento black ink pad
  • wink of stella- clear
  • American crafts white twine
for the baby boy card you will also need:
  • tim holtz 'squeezed lemonade' distress ink pad
  • promarkers- pastel blue& denim blue
  • big yellow button
for the baby girl card you will also need:
  • tim holtz 'spun sugar' distress ink pad
  • promarkers- cocktail pink & pale pink
  • white paper flower & small pink button
 
to make these cards, I inked my card blanks with the coordinating colours. I die cut the stitched square from white cardstock. I added my large sentiment stamp to this, placing it near the bottom. I coloured the open areas in the sentiment to match some paper I had chosen. I added wink of stella over the colouring for a bit of added sparkle. I cut a strip of the patterned paper and die cut with the same stitched square die so this detail would follow right around the edge of the card. I then used a landscape die to create a curve on the bottom edge to follow the sketch. i threaded some twine through the button and tied in a knot. I glued all the layers on to my card blank before finally adding my button. to finish the card, i also stamped a matching 'congratulations' sentiment inside the card.

 
i made a slight change on the girl card, using a white paper flower and a small pink button instead of the large button. i still added the white twine, but tied this in a bow to be more girly.
Mx
 
i would like to enter this card into the

Friday, 4 September 2015

baby love !!


  • LOTV- 'baby with bunny' & 'rocking horse' stamps
  • SU! 'simply wonderful' sentiment stamp
  • mdf heart shape from the mdf man
  • tim holtz tissue wrap- terminologie
  • Claudine hellmuth studio paints and brushes
  • docrafts artiste- flesh
  • golden gel medium
to make this heart hanging decoration, i first painted it cream. I covered my mdf blank with the tissue wrap, then painted another coat of cream over the top. i used brown paint on a sponge to distress the edges. i stamped my chosen images and used the studio paints to colour them. i use a fine brush to do the black outline and details, to give a neater finish as most of the detail is lost during painting the colours. i threaded a ribbon through the hole at the top and tied a couple of bows to finish.
Mx

Friday, 28 August 2015

baby with a bunny...

  • LOTV- 'baby with bunny' & set26 'simply sophisticated' stamps
  • crafters companion Neenah cardstock
  • memento ink pad- tuxedo black
  • copics- E50,51,21,11,55,57,59. R81,83,85
  • LOTV/nit wit- country meadow 8x8" papers
  • sizzix circle framelit die
  • dove craft- tea party doilies
  • archival ink pad- coffee 
  • stickles- star dust
  • 5x5" kraft card blank
  • SU! 'friendly phrases' sentiment stamp (used inside)
to make this card, I cut a strip of pink paper and glued it to the bottom section of my card blank. I die cut a circle of yellow paper to fit in the centre of a doily, then glued these to the middle of my card. I stamped and coloured the focal image and fussy cut it then stuck it to my card using foam tape. I added a sentiment, and glitter to the edges of my paper layers.
Mx 

challenges:
simon Wednesday- 'anything goes'

Wednesday, 25 February 2015

two by two...

  • 6 x 4 kraft card blank craftwork cards digi cardstock and yellow pearl linen cardstock
  • SU! 'two by two' stamp
  • memento ink and promarkers
  • a brown button and twine
 
I decided to create a vibrant, gender neutral baby card and thought this Noah's ark stamp would work well with the kraft and yellow colour scheme. Following the sketch, I cut my cardstock on an angle to create my mat and layers. I stamped the image (not inking the sentiment attached) and coloured this with promarkers. I then cleaned the stamp and inked only the sentiment this time. this was cut into a banner shape and layered onto more yellow. I curled the edge for a bit of dimension before gluing down all of my layers onto the card blank. the finishing touch of a button tied with twine was added to complete the sketch.
 
Mx

Monday, 20 October 2014

twins!!


just a quick one tonight...
I mat and layered digi cardstock and papers (bear necessities pad from lili of the valley), on to a 6x6" card blank. I inked the edges of the paper with tim holtz distress inks (gathered twigs), on one of the layers I used a scallop border punch from stampin' up! to add interest. I stamped my image (twice as nice from lili of the valley) on to digi cardstock using memento ink and coloured using promarkers. I stamped the sentiment to match in the bottom corner to complete the design.
 

 
Mx

Monday, 10 March 2014

perfectly pearly !!

 
stamps: express yourself from stampin up!
inks: archival ink pad (coffee)
papers: 5 x 7 cream card blank, cream card stock, pearl cardstock (cream) embossed patterned cardstock (sorry about the lack of suppliers but these were all from my stash!!)
punches: pansy punch from stampin up! 
other: pearl brad

I used the sketch as inspiration for the layout of this anniversary card. since it is their year of the pearl, I kept the colour scheme very neutral, playing with different patterns and textures to create interest. the matts were cut by laying a ruler on the edge of the card, with the sheet of paper in position beneath on the card blank, the corners were then marked and the paper trimmed to create the angled layers. this was repeated with each of my chosen papers. the band was stamped with the sentiment before cutting it to size and layering it onto the card. I used the flower punch to cut several layers out of pearl paper. the edges were curled to give it dimension and a brad was added to the centre to secure it all in place. I think this makes for a very sophisticated card, perfect for the occasion.  
Freshly made sketch #126
Mx

Saturday, 1 March 2014

summer lanterns ...


stamps: happy congratulations from stampin' up!, stitches clear stamps from hot off the press
inks: archival ink pad (jet black, deep purple, chrome yellow, venetian orange, magenta hue, aqua marine)
cardstock: craftwork cards digi cardstock, black 4x6" card blank plus black card

I cut a matt to create the topper. this was stamped with the outline of the main image in black. I then used various colours with the block shape to complete the image, (the stamp-a-ma-jig is useful to help line this up, it wont look perfect as the block is a different size to the outline, but it will give you more control over the final effect.) I matted this onto black to give it definition. for the background, I cut a second matt to fit the card blank and  scattered the block image all over in the same colours. by using the stamp on its second and third print, the effect is much softer which I think works well for backgrounds. I stamped a congratulations sentiment at the bottom of this matt. the stitched line stamped beneath the sentiment, (stamped in two halves, one either side of the 'g' to create that gap) adds the finishing touch to complete the sketch.
 
case this sketch #66
 
Mx